A warehouse has a huge roof, tall ceilings and big doors. In Central Texas, that roof soaks up sun all day and passes the heat down into the building. If the warehouse is air-conditioned, the cooling bill climbs fast. If it is not, the space can get hot enough to slow down your crew and damage stock that does not handle heat well.
Centex Insulation Solutions uses commercial spray foam insulation to help warehouses and storage buildings in Georgetown, Round Rock and along the I-35 and SH 130 corridors stay more comfortable and efficient. Spray foam seals and insulates the roof and walls in one step, keeps out heat and moisture, and does not sag or settle over time.
Most warehouses, especially steel warehouses, have metal roof decks or metal wall panels. For these buildings, metal building insulation can help control heat transfer and moisture while improving indoor comfort. Closed-cell spray foam is usually the best fit because it bonds to metal, blocks moisture and gives about R-6 to R-7 per inch. (R-value measures how well insulation blocks heat. Higher is better.) It is also light, so it adds very little weight to the roof.
Open-cell foam gives about R-3.5 to R-3.8 per inch and costs less per inch. It can work in parts of a warehouse, such as office areas finished with drywall, where sound control matters and the foam does not touch bare metal.
Most warehouses cannot shut down for a week. We plan the job to limit downtime:
Warehouse roofs and ceilings are major areas for heat gain, especially under large metal roof decks. Closed-cell spray foam can be applied to the underside of the roof to create a continuous insulation and air seal, helping reduce heat transfer and moisture problems. In areas with an accessible attic or ceiling cavity, blown-in insulation can also be an effective option for adding insulation above the ceiling and improving temperature control. The right approach depends on the roof design, existing insulation, ventilation, and how the space below is used.
Warehouses are commercial buildings, and building codes usually require spray foam to be separated from the inside of the building by a fire-rated barrier or an approved fire-protective coating. New warehouses and some renovations must also meet energy code rules, which set a minimum level of insulation. Foam must also be kept clear of sprinkler heads, light fixtures and electrical boxes. We go over what applies to your building before we quote, so you know what is needed for inspection.
Centex Insulation Solutions is based at 309 Wildwood Dr in Georgetown, TX. Our crew insulates warehouses and storage buildings in Georgetown, Round Rock, Pflugerville, Hutto, Taylor, Leander, Cedar Park and the surrounding Central Texas area.
Often, yes. Foam on the roof cuts the heat coming into the building, so the space stays cooler during the day. It also stops roof condensation, which protects stock and keeps floors dry.
In most cases, yes. We work in sections, cover your stock and racking, and set clear times for when each area can be used again.
No. Closed-cell foam weighs about 2 pounds per cubic foot. A 2-inch layer adds only about a third of a pound per square foot.
It depends on the size of the building, the ceiling height and how much prep is needed. We give you a timeline with your quote and plan the work around your schedule.
Usually not. Foam needs to bond to a clean, dry surface, so old faced fiberglass that is torn, sagging or wet normally has to be removed first. We check your current insulation during the site visit.
It depends on how much insulation you have now, how the building is used, and how much it is cooled or heated. Warehouses with little or no insulation usually see the biggest change. We can talk through what to expect for your building.
Call Centex Insulation Solutions at (512) 755-4649 to schedule a site visit.
Related services: Commercial Spray Foam Insulation, Metal Building Insulation, Pole Barn Insulation
